




DIGISOL L3 Dual Stack Intelligent Switch – DG-GS5638FSE
Key Features:
Energy Efficiency: Equipped with energy-saving features and auto-adjusting fan units for optimal performance.
Enhanced Security: Supports advanced authentication protocols, including RADIUS and TACACS+, ensuring secure network access.
Comprehensive Service Capabilities: Designed to handle diverse networking requirements with high reliability.
Robust IPv6 Support: Provides a flexible and scalable IPv6 solution for future-proof networking.
Advanced Layer 3 Routing: Supports dynamic routing protocols such as RIP, OSPF, and BGP for efficient traffic management.
Multicast Optimization: Includes Multicast VLAN Register (MVR) and other multicast features for seamless data distribution across networks.
DIGISOL DG-GS5638FSE – L3 Dual Stack Intelligent Switch
Ports & Connectivity:
24 x GE SFP Ports – High-speed optical connectivity
8 x GE TX Ports – Copper Ethernet connections
6 x 10GE/GE SFP+ Ports – High-bandwidth uplink options
1 x Console Port – Management and configuration
Performance:
Switching Capacity: 216 Gbps
Forwarding Rate: 138 Mpps
MAC Address Table: 32K
Jumbo Frame Support: 9K
ARP Table: 16K
Routing Table: 32K
ACL Table: 1K
L3 Interfaces: Up to 1K
Physical Specifications:
Dimensions: 440mm × 350mm × 44mm
Power Supply: Hot-swappable AC (100V–240V, 50–60Hz)
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: 5%–90% (non-condensing), Storage: 95%
Main Features:
Switching & Forwarding:
Storage and Forwarding Architecture for reliable data transmission
VLAN Support:
4K Active VLANs
QinQ & Selective QinQ
GVRP (GARP VLAN Registration Protocol)
Voice VLAN for optimized VoIP traffic
DHCP Capabilities:
DHCP Server, Relay, and Client
DHCP Snooping with Option 82
Spanning Tree Protocols:
STP (802.1D), RSTP (802.1W), MSTP (802.1S) for redundancy and loop prevention
BPDU Guard, Root Guard, and Loopback Guard
Security Features:
Port Isolation & Security
IP + MAC + Port Binding
MAC Sticky & Dynamic ARP Inspection (DAI)
PPPoE+, IEEE 802.1x, RADIUS & TACACS+ Authentication
L2/L3/L4 ACL for Traffic Filtering
DDoS Protection (TCP SYN Flood, UDP Flood, etc.)
Storm Control for Broadcast, Multicast, and Unknown Unicast Traffic
Advanced Encryption: MD5, SHA-256, RSA-1024, AES-256
Multicast Support:
PIM-SM, PIM-DM (Protocol Independent Multicast)
IGMP v1/v2/v3 & IGMP Snooping
MVR (Multicast VLAN Registration) & IGMP Filtering
QoS & Traffic Management:
Advanced QoS (CAR, HQoS, MAC/IP/TCP/UDP/VLAN/COS/DSCP/TOS based policies)
802.1P/DSCP Priority Marking & Relabeling
SP, WRR, and Hybrid (SP+WRR) Queue Scheduling
Tail-Drop & WRED for Congestion Management
Traffic Flow Monitoring & Traffic Shaping
IPv4 & IPv6 Routing:
IPv4: Static Routing, RIP v1/v2, OSPF, BGP, Policy-Based Routing (PBR), ECMP
IPv6: Static Routing, RIPng, OSPFv3, BGP4+, MLD v1/v2, MLD Snooping
IPv6 Transition Mechanisms: Manual Tunnel, ISATAP Tunnel, 6-to-4 Tunnel
Additional IPv6 Features: ICMPv6, DHCPv6, IPv6 ACL, Telnet, Path MTU Discovery
Reliability & Redundancy:
Link Aggregation (Static & LACP), Interface Backup
BVSS Virtual Stacking
EAPS & ERPS for Network Recovery
URPF (Unicast Reverse Path Forwarding) & LLDP
ISSU (In-Service Software Upgrade)
VRRP for Gateway Redundancy
1+1 Power Redundancy
Management & Monitoring:
Multiple Access Methods: Console, Telnet, SSH v1/v2, HTTP, HTTPS
SNMP v1/v2/v3, RMON for Network Monitoring
Firmware & Configuration Management: TFTP, FTP, SFTP**
Time Synchronization: NTP Support
Traffic Analysis: sFlow, SPAN, RSPAN
General
- TypesManaged
- Switching Capacity216 Gbit/s


